Breizh/dotfiles
1
0
Fork 0
Code Issues Pull requests Projects Releases Packages Wiki Activity

Ajout de configs

Browse source
This commit is contained in:
Breizh 2020-02-05 19:42:02 +01:00
parent ed7e33d5a5
commit 21824ede4f
6 changed files with 277 additions and 0 deletions
Show stats Download patch file Download diff file Expand all files Collapse all files

144
.config/cava/config Normal file
View file

@ -0,0 +1,144 @@
## Configuration file for CAVA. Default values are commented out. Use either ';' or '#' for commenting.
[general]
# Smoothing mode. Can be 'normal', 'scientific' or 'waves'. DEPRECATED as of 0.6.0
; mode = normal
# Accepts only non-negative values.
framerate = 60
# 'autosens' will attempt to decrease sensitivity if the bars peak. 1 = on, 0 = off
# new as of 0.6.0 autosens of low values (dynamic range)
# 'overshoot' allows bars to overshoot (in % of terminal height) without initiating autosens. DEPRECATED as of 0.6.0
; autosens = 1
; overshoot = 20
# Manual sensitivity in %. Autosens must be turned off for this to take effect.
# 200 means double height. Accepts only non-negative values.
; sensitivity = 100
# The number of bars (0-200). 0 sets it to auto (fill up console).
# Bars' width and space between bars in number of characters.
;bars = 0
;bar_width = 1
;bar_spacing = 0
# Lower and higher cutoff frequencies for lowest and highest bars
# the bandwidth of the visualizer.
# Note: there is a minimum total bandwidth of 43Mhz x number of bars.
# Cava will automatically increase the higher cutoff if a too low band is specified.
; lower_cutoff_freq = 50
; higher_cutoff_freq = 10000
[input]
# Audio capturing method. Possible methods are: 'pulse', 'alsa', 'fifo' or 'sndio'.
# Defaults to 'pulse', 'alsa' or 'fifo', in that order, dependent on what support cava was built with.
#
# All input methods uses the same config variable 'source'
# to define where it should get the audio.
#
# For pulseaudio 'source' will be the source. Default: 'auto', which uses the monitor source of the default sink
# (all pulseaudio sinks(outputs) have 'monitor' sources(inputs) associated with them).
#
# For alsa 'source' will be the capture device.
# For fifo 'source' will be the path to fifo-file.
method = pulse
source = auto
; method = alsa
; source = hw:Loopback,1
; method = fifo
; source = /tmp/mpd.fifo
[output]
# Ouput method. Can be 'ncurses', 'noncurses' or 'raw'.
# 'noncurses' is for systems that does not suport ncurses.
# 'raw' is a 16 bit data stream of the bar heights that can be used to send to other applications.
# 'raw' defaults to 200 bars, which can be adjusted in the 'bars' option above.
; method = ncurses
# Visual channels. Can be 'stereo' or 'mono'.
# 'stereo' mirrors both channels with low frequencies in center.
# 'mono' averages both channels and outputs left to right lowest to highest frequencies.
; channels = stereo
# Raw output target. A fifo will be created if target does not exist.
; raw_target = /dev/stdout
# Raw data format. Can be 'binary' or 'ascii'.
; data_format = binary
# Binary bit format, can be '8bit' (0-255) or '16bit' (0-65530).
; bit_format = 16bit
# Ascii max value. In 'ascii' mode range will run from 0 to value specified here
; ascii_max_range = 1000
# Ascii delimiters. In ascii format each bar and frame is separated by a delimiters.
# Use decimal value in ascii table (i.e. 59 = ';' and 10 = '\n' (line feed)).
; bar_delimiter = 59
; frame_delimiter = 10
[color]
# Colors can be one of seven predefined: black, blue, cyan, green, magenta, red, white, yellow.
# Or defined by hex code '#xxxxxx' (hex code must be within ''). User defined colors requires a
# terminal that can change color definitions such as Gnome-terminal or rxvt.
; background = black
; foreground = '#008080'
# Gradient mode, only hex defined colors are supported, background must also be defined in hex
# or remain commented out. 1 = on, 0 = off. Warning: for certain terminal emulators cava will
# not able to restore color definitions on exit, simply restart your terminal to restore colors.
gradient = 1
gradient_count = 3
gradient_color_1 = '#008080'
gradient_color_2 = '#D58E00'
gradient_color_3 = '#D50000'
[smoothing]
# Percentage value for integral smoothing. Takes values from 0 - 100.
# Higher values means smoother, but less precise. 0 to disable.
; integral = 70
# Disables or enables the so-called "Monstercat smoothing" with or without "waves". Set to 0 to disable.
; monstercat = 1
; waves = 0;
# Set gravity percentage for "drop off". Higher values means bars will drop faster.
# Accepts only non-negative values. 50 means half gravity, 200 means double. Set to 0 to disable "drop off".
; gravity = 100
; gravity = 200
; gravity = 0
# In bar height, bars that would have been lower that this will not be drawn.
; ignore = 0
[eq]
# This one is tricky. You can have as much keys as you want.
# Remember to uncomment more then one key! More keys = more precision.
# Look at readme.md on github for further explanations and examples.
; 1 = 1 # bass
; 2 = 1
; 3 = 1 # midtone
; 4 = 1
; 5 = 1 # treble

41
.config/mpv/scripts/delete-file.lua Normal file
View file

@ -0,0 +1,41 @@
local utils = require "mp.utils"
del_list = {}
function contains_item(l, i)
for k, v in pairs(l) do
if v == i then
mp.osd_message("undeleting current file")
l[k] = nil
return true
end
end
mp.osd_message("deleting current file")
return false
end
function mark_delete()
local work_dir = mp.get_property_native("working-directory")
local file_path = mp.get_property_native("path")
local s = file_path:find(work_dir, 0, true)
local final_path
if s and s == 0 then
final_path = file_path
else
final_path = utils.join_path(work_dir, file_path)
end
if not contains_item(del_list, final_path) then
table.insert(del_list, final_path)
end
end
function delete()
for i, v in pairs(del_list) do
print("deleting: "..v)
os.remove(v)
end
end
mp.add_key_binding("ctrl+DEL", "delete_file", mark_delete)
mp.register_event("shutdown", delete)

13
.config/redshift.conf Normal file
View file

@ -0,0 +1,13 @@
[redshift]
temp-day=4500
temp-night=3400
transition=1
location-provider=manual
adjustment-method=randr
[manual]
lat=48.10038
lon=-1.66612

61
.config/redshift/hooks/brightness.sh Normal file
View file

@ -0,0 +1,61 @@
#!/bin/sh
# Set brightness via xbrightness when redshift status changes
# Set brightness values for each status.
# Range from 0 to 100 is valid
brightness_day="100"
brightness_transition="60"
brightness_night="20"
max=$(cat /sys/class/backlight/intel_backlight/max_brightness)
actual=$(cat /sys/class/backlight/intel_backlight/actual_brightness)
case $1 in
period-changed)
case $3 in
night)
for (( c=$actual; c > $((( $brightness_night * $max / 100))); c-=1 ))
do
echo $c > /sys/class/backlight/intel_backlight/brightness
sleep .2
done
;;
transition)
old="$2"
if [[ "$old" == "none" ]]
then
if [[ $actual -lt $(( $brightness_transition * $max / 100 )) ]]
then
old="night"
else
old="daytime"
fi
fi
case $old in
night)
for (( c=$actual; c < $((( $brightness_transition * $max / 100))); c+=1 ))
do
echo $c > /sys/class/backlight/intel_backlight/brightness
sleep .2
done
;;
daytime)
for (( c=$actual; c > $((( $brightness_transition * $max / 100))); c-=1 ))
do
echo $c > /sys/class/backlight/intel_backlight/brightness
sleep .2
done
;;
esac
;;
daytime)
for (( c=$actual; c < $((( $brightness_day * $max / 100))); c+=1 ))
do
echo $c > /sys/class/backlight/intel_backlight/brightness
sleep .2
done
echo $max > /sys/class/backlight/intel_backlight/brightness
;;
esac
;;
esac

6
.config/redshift/hooks/notifcation.sh Executable file
View file

@ -0,0 +1,6 @@
#!/bin/sh
case $1 in
period-changed)
exec dunstify -u low -r $(sum <<<"redshift" | cut -d' ' -f1) "Redshift" "Period changed to $3"
esac

12
.config/systemd/user/mpd-notif.service Normal file
View file

@ -0,0 +1,12 @@
[Unit]
PartOf=mpd.service
After=mpd.service
Requires=mpd.service
Description=MPD Notifications
[Service]
ExecStart=/home/breizh/.local/bin/mpd-notif
Restart=on-failure
[Install]
WantedBy=default.target