Adaptation des scripts i3blocks

.config/i3blocks/config

@@ -11,7 +11,6 @@
 # full_text
 # instance
 # interval
-# label
 # min_width
 # name
 # separator
@@ -24,7 +23,7 @@
 #
 # The top properties below are applied to every block, but can be overridden.
 # Each block command defaults to the script name to avoid boilerplate.
-command=${HOME}/.i3blocks/$BLOCK_NAME
+command=${HOME}/.i3blocks/$name
 separator_block_width=11
 markup=pango
 
@@ -37,13 +36,11 @@ markup=pango
 # The script may be called with -w and -c switches to specify thresholds,
 # see the script for details.
 [cpu_usage]
-#label=
 interval=1
 #min_width= 99.99%
 #separator=false
 
 [load_average]
-#label=
 interval=5
 
 # Temperature
@@ -52,27 +49,22 @@ interval=5
 # The script may be called with -w and -c switches to specify thresholds,
 # see the script for details.
 #[temperature]
-##label=
-#label=cpu
 #instance=coretemp-isa-0000
 #interval=3
 #separator=false
 #
 #[temperature]
-#label=gpu
 #instance=radeon-pci-0300
 #interval=3
 # Memory usage
 #
 # The type defaults to "mem" if the instance is not specified.
 [memory]
-label=ram
 #separator=false
 interval=2
 #min_width=RAM 99.99%
 
 #[memory]
-#label=swap
 #instance=swap
 ##separator=false
 #interval=2
@@ -84,18 +76,15 @@ interval=2
 # The script may be called with a optional argument to set the alert
 # (defaults to 10 for 10%).
 #[disk]
-#label=
 #instance=/
 #interval=30
 #separator=false
 
 #[disk]
-#label=
 #instance=/mnt/data
 #interval=30
 
 [internet]
-label=wan
 interval=30
 separator=false
 
@@ -104,18 +93,15 @@ separator=false
 # If the instance is not specified, use the interface used for default route.
 # The address can be forced to IPv4 or IPv6 with -4 or -6 switches.
 #[iface]
-#label=wlan
 #instance=wlp1s0
 #interval=10
 #separator=false
 
 #[public_ip]
-#label=
 #interval=60
 #separator=false
 
 [vpn]
-label=vpn
 interval=30
 separator=false
 
@@ -125,13 +111,10 @@ separator=false
 
 # Packages to update
 [updates]
-label=updt
 interval=600
 
 
 #[wifi]
-##label=
-##label=wlan
 #instance=wlp1s0
 #interval=3
 #separator=false
@@ -151,14 +134,11 @@ interval=600
 #
 # The battery instance defaults to 0.
 #[battery]
-#label=BAT
-#label=⚡
 #instance=0
 #interval=5
 
 #[batterybar]
 #[battery]
-#label=bat
 #interval=10
 #min_width="bat ██████"
 
@@ -184,19 +164,17 @@ signal=13
 # The second parameter overrides the mixer selection
 # See the script for details.
 [volume]
-instance=Master
+instance=vol
 #instance=PCM
 interval=once
 signal=10
 separator=false
-label=vol
 
 [volume]
-instance=Capture
+instance=mic
 #instance=PCM
 interval=once
 signal=10
-label=mic
 
 
 # Key indicators
@@ -206,15 +184,13 @@ label=mic
 # bindsym --release Caps_Lock exec pkill -SIGRTMIN+11 i3blocks
 # bindsym --release Num_Lock  exec pkill -SIGRTMIN+12 i3blocks
 [keyindicator]
-label=caps
+instance=Caps
-instance=CAPS
 interval=once
 signal=11
 separator=false
 
 [keyindicator]
-label=num
+instance=Num
-instance=NUM
 interval=once
 signal=12
 # Date Time

.i3blocks/cpu_usage

@@ -19,4 +19,4 @@ else color="#66cccc"
 fi
 
 # Affichage
-printf "cpu<span foreground=\"%s\">%3d%%</span>" "$color" "$used"
+printf "cpu<span foreground=\"%s\">%3d%%</span>\n" "$color" "$used"

.i3blocks/internet

@@ -28,4 +28,4 @@ else
 	fi
 fi
 
-echo "<span foreground=\"$color\">█</span>"
+echo "wan <span foreground=\"$color\">█</span>"

.i3blocks/keyindicator

@@ -1,70 +1,14 @@
-#!/usr/bin/perl
+#!/bin/bash
-#
-# Copyright 2014 Marcelo Cerri <mhcerri at gmail dot com>
-#
-# This program is free software: you can redistribute it and/or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
 
-use strict;
+[[ -z "$instance" ]] && instance=Caps
-use warnings;
-use utf8;
-use Getopt::Long;
-use File::Basename;
 
-# Default values
+status=$(xset q | grep -Po "$instance Lock: +(on|off)" | grep -Po "on|off")
-my $indicator = $ENV{BLOCK_INSTANCE} || "CAPS";
-my $color_on  = "#99cc99";
-my $color_off = "#515151";
 
-sub help {
+if [[ "$status" = "on" ]]
-    my $program = basename($0);
+then
-    printf "Usage: %s [-c <color on>] [-C <color off>]\n", $program;
+	color="#99CC99"
-    printf "  -c <color on>: hex color to use when indicator is on\n";
+else
-    printf "  -C <color off>: hex color to use when indicator is off\n";
+	color="#515151"
-    printf "\n";
+fi
-    printf "Note: environment variable \$BLOCK_INSTANCE should be one of:\n";
-    printf "  CAPS, NUM (default is CAPS).\n";
-    exit 0;
-}
 
-Getopt::Long::config qw(no_ignore_case);
+echo "${instance,*} <span foreground=\"$color\">█</span>"
-GetOptions("help|h" => \&help,
-           "c=s"    => \$color_on,
-           "C=s"    => \$color_off) or exit 1;
-
-# Key mapping
-my %indicators = (
-    CAPS => 0x00000001,
-    NUM  => 0x00000002,
-);
-
-# Retrieve key flags
-my $mask = 0;
-open(XSET, "xset -q |") or die;
-while (<XSET>) {
-    if (/LED mask:\s*([0-9]+)/) {
-        $mask = $1;
-        last;
-    }
-}
-close(XSET);
-
-my $indi = "N";
-
-# Output
-if (($indicators{$indicator} || 0) & $mask) {
-    printf "<span foreground=\"%s\">█</span>", $color_on;
-} else {
-    printf "<span foreground=\"%s\">█</span>", $color_off;
-}
-exit 0

.i3blocks/memory

@@ -16,6 +16,8 @@
 
 TYPE="${BLOCK_INSTANCE:-mem}"
 
+echo -n "${TYPE//mem/ram} "
+
 awk -v type=$TYPE '
 /^MemTotal:/ {
 	mem_total=$2

.i3blocks/updates

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+echo -n "updt "
+
 if [[ -f /dev/shm/claws_offline ]]
 then
 	echo "<span foreground=\"#F2777A\">█</span>"

.i3blocks/volume

@@ -1,95 +1,29 @@
 #!/bin/bash
-# Copyright (C) 2014 Julien Bonjean <julien@bonjean.info>
-# Copyright (C) 2014 Alexander Keller <github@nycroth.com>
 
-# This program is free software: you can redistribute it and/or modify
+if [[ "$instance" == mic ]]
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation, either version 3 of the License, or
-# (at your option) any later version.
-
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-# GNU General Public License for more details.
-
-# You should have received a copy of the GNU General Public License
-# along with this program.  If not, see <http://www.gnu.org/licenses/>.
-
-#------------------------------------------------------------------------
-
-# The second parameter overrides the mixer selection
-# For PulseAudio users, use "pulse"
-# For Jack/Jack2 users, use "jackplug"
-# For ALSA users, you may use "default" for your primary card
-# or you may use hw:# where # is the number of the card desired
-MIXER="default"
-[ -n "$(lsmod | grep pulse)" ] && MIXER="pulse"
-[ -n "$(lsmod | grep jack)" ] && MIXER="jackplug"
-MIXER="${2:-$MIXER}"
-
-# The instance option sets the control to report and configure
-# This defaults to the first control of your selected mixer
-# For a list of the available, use `amixer -D $Your_Mixer scontrols`
-SCONTROL="${BLOCK_INSTANCE:-$(amixer -D $MIXER scontrols |
-                  sed -n "s/Simple mixer control '\([A-Za-z ]*\)',0/\1/p" |
-                  head -n1
-                )}"
-
-# The first parameter sets the step to change the volume by (and units to display)
-# This may be in in % or dB (eg. 5% or 3dB)
-STEP="${1:-5%}"
-
-#------------------------------------------------------------------------
-
-capability() { # Return "Capture" if the device is a capture device
-  amixer -D $MIXER get $SCONTROL |
-    sed -n "s/  Capabilities:.*cvolume.*/Capture/p"
-}
-
-volume() {
-  amixer -D $MIXER get $SCONTROL $(capability)
-}
-
-format() {
-  TYPE=""
-  TYPE_MUTE=""
-  if [[ $SCONTROL = "Master" ]]
 then
-  #  TYPE_MUTE=" "
+	options=" --default-source"
-  #  TYPE=" "
-  #  TYPE="vol "
-  #  TYPE_MUTE="vol "
-    TYPE='<span foreground=\"#99CC99\">'
-    TYPE_MUTE='<span foreground=\"#F2777A\">'
-  elif [[ $SCONTROL = "Capture" ]]
-  then
-  #  TYPE_MUTE=" "
-  #  TYPE=" "
-  #  TYPE="mic "
-  #  TYPE_MUTE="mic "
-    TYPE='<span foreground=\"#99CC99\">'
-    TYPE_MUTE='<span foreground=\"#F2777A\">'
 fi
-  perl_filter='if (/.*\[(\d+%)\] (\[(-?\d+.\d+dB)\] )?\[(on|off)\]/)'
-  perl_filter+='{CORE::say $4 eq "off" ? "'
-  perl_filter+=$TYPE_MUTE
-  perl_filter+=$([[ $STEP = *dB ]] && echo '$3' || echo '$1')
-  perl_filter+='</span>" : "'
-  perl_filter+=$TYPE
-  # If dB was selected, print that instead
-  perl_filter+=$([[ $STEP = *dB ]] && echo '$3' || echo '$1')
-  perl_filter+='</span>"; exit}'
-  perl -ne "$perl_filter"
-}
 
-#------------------------------------------------------------------------
+mixer="pamixer${options}"
 
-case $BLOCK_BUTTON in
+case $button in
-  3) amixer -q -D $MIXER sset $SCONTROL $(capability) 1%+ ;;
+	1) $mixer -d 1;;
-  1) amixer -q -D $MIXER sset $SCONTROL $(capability) 1%- ;;
+	2) $mixer -t;;
-  2) amixer -q -D $MIXER sset $SCONTROL $(capability) toggle ;;  # right click, mute/unmute
+	3) $mixer -i 1;;
-  4) amixer -q -D $MIXER sset $SCONTROL $(capability) ${STEP}+ ;; # scroll up, increase
+	4) $mixer -i 5;;
-  5) amixer -q -D $MIXER sset $SCONTROL $(capability) ${STEP}- ;; # scroll down, decrease
+	5) $mixer -d 5;;
 esac
 
-volume | format
+volume="$($mixer --get-volume)"
+muted="$($mixer --get-mute)"
+
+if $muted
+then
+	color="#F2777A"
+else
+	color="#99CC99"
+fi
+
+printf "%s <span foreground=\"%s\">%2d%%</span>\n" "$BLOCK_INSTANCE" "$color" "$volume"
+

.i3blocks/vpn

@@ -1,5 +1,7 @@
 #!/bin/bash
 
+echo -n "vpn "
+
 if nmcli dev | grep tun0 | cut -f3 | grep " connecté" &>/dev/null
 then
 	echo "<span foreground=\"#99CC99\">█</span>"