Ajout de configs

.config/cava/config

@@ -0,0 +1,144 @@
+## Configuration file for CAVA. Default values are commented out. Use either ';' or '#' for commenting.
+
+
+[general]
+
+# Smoothing mode. Can be 'normal', 'scientific' or 'waves'. DEPRECATED as of 0.6.0
+; mode = normal
+ 
+# Accepts only non-negative values.
+framerate = 60
+
+# 'autosens' will attempt to decrease sensitivity if the bars peak. 1 = on, 0 = off
+# new as of 0.6.0 autosens of low values (dynamic range)
+# 'overshoot' allows bars to overshoot (in % of terminal height) without initiating autosens. DEPRECATED as of 0.6.0
+; autosens = 1
+; overshoot = 20
+
+# Manual sensitivity in %. Autosens must be turned off for this to take effect.
+# 200 means double height. Accepts only non-negative values.
+; sensitivity = 100
+
+# The number of bars (0-200). 0 sets it to auto (fill up console).
+# Bars' width and space between bars in number of characters.
+;bars = 0
+;bar_width = 1
+;bar_spacing = 0
+
+
+# Lower and higher cutoff frequencies for lowest and highest bars
+# the bandwidth of the visualizer.
+# Note: there is a minimum total bandwidth of 43Mhz x number of bars.
+# Cava will automatically increase the higher cutoff if a too low band is specified.
+; lower_cutoff_freq = 50
+; higher_cutoff_freq = 10000
+
+
+
+[input]
+
+# Audio capturing method. Possible methods are: 'pulse', 'alsa', 'fifo' or 'sndio'.
+# Defaults to 'pulse', 'alsa' or 'fifo', in that order, dependent on what support cava was built with.
+#
+# All input methods uses the same config variable 'source'
+# to define where it should get the audio.
+#
+# For pulseaudio 'source' will be the source. Default: 'auto', which uses the monitor source of the default sink
+# (all pulseaudio sinks(outputs) have 'monitor' sources(inputs) associated with them).
+# 
+# For alsa 'source' will be the capture device.
+# For fifo 'source' will be the path to fifo-file.
+method = pulse
+source = auto
+
+; method = alsa
+; source = hw:Loopback,1
+
+; method = fifo
+; source = /tmp/mpd.fifo
+
+
+
+[output]
+
+# Ouput method. Can be 'ncurses', 'noncurses' or 'raw'. 
+# 'noncurses' is for systems that does not suport ncurses.
+# 'raw' is a 16 bit data stream of the bar heights that can be used to send to other applications.
+# 'raw' defaults to 200 bars, which can be adjusted in the 'bars' option above.
+; method = ncurses
+
+# Visual channels. Can be 'stereo' or 'mono'.
+# 'stereo' mirrors both channels with low frequencies in center.
+# 'mono' averages both channels and outputs left to right lowest to highest frequencies.
+; channels = stereo
+
+# Raw output target. A fifo will be created if target does not exist.
+; raw_target = /dev/stdout
+
+# Raw data format. Can be 'binary' or 'ascii'.
+; data_format = binary
+
+# Binary bit format, can be '8bit' (0-255) or '16bit' (0-65530).
+; bit_format = 16bit
+
+# Ascii max value. In 'ascii' mode range will run from 0 to value specified here
+; ascii_max_range = 1000
+
+# Ascii delimiters. In ascii format each bar and frame is separated by a delimiters.
+# Use decimal value in ascii table (i.e. 59 = ';' and 10 = '\n' (line feed)).
+; bar_delimiter = 59
+; frame_delimiter = 10
+
+
+
+[color]
+
+# Colors can be one of seven predefined: black, blue, cyan, green, magenta, red, white, yellow.
+# Or defined by hex code '#xxxxxx' (hex code must be within ''). User defined colors requires a
+# terminal that can change color definitions such as Gnome-terminal or rxvt.
+; background = black
+; foreground = '#008080'
+
+# Gradient mode, only hex defined colors are supported, background must also be defined in hex
+# or remain commented out. 1 = on, 0 = off. Warning: for certain terminal emulators cava will
+# not able to restore color definitions on exit, simply restart your terminal to restore colors.
+gradient = 1
+gradient_count = 3
+gradient_color_1 = '#008080'
+gradient_color_2 = '#D58E00'
+gradient_color_3 = '#D50000'
+
+
+
+[smoothing]
+
+# Percentage value for integral smoothing. Takes values from 0 - 100.
+# Higher values means smoother, but less precise. 0 to disable.
+; integral = 70
+
+# Disables or enables the so-called "Monstercat smoothing" with or without "waves". Set to 0 to disable. 
+; monstercat = 1
+; waves = 0;
+
+# Set gravity percentage for "drop off". Higher values means bars will drop faster.
+# Accepts only non-negative values. 50 means half gravity, 200 means double. Set to 0 to disable "drop off".
+; gravity = 100
+; gravity = 200
+; gravity = 0
+
+
+# In bar height, bars that would have been lower that this will not be drawn.
+; ignore = 0
+
+
+[eq]
+
+# This one is tricky. You can have as much keys as you want.
+# Remember to uncomment more then one key! More keys = more precision.
+# Look at readme.md on github for further explanations and examples.
+; 1 = 1 # bass
+; 2 = 1
+; 3 = 1 # midtone
+; 4 = 1
+; 5 = 1 # treble
+

.config/mpv/scripts/delete-file.lua

@@ -0,0 +1,41 @@
+local utils = require "mp.utils"
+
+del_list = {}
+
+function contains_item(l, i)
+   for k, v in pairs(l) do
+      if v == i then
+         mp.osd_message("undeleting current file")
+         l[k] = nil
+         return true
+      end
+   end
+   mp.osd_message("deleting current file")
+   return false
+end
+
+function mark_delete()
+   local work_dir = mp.get_property_native("working-directory")
+   local file_path = mp.get_property_native("path")
+   local s = file_path:find(work_dir, 0, true)
+   local final_path
+   if s and s == 0 then
+      final_path = file_path
+   else
+      final_path = utils.join_path(work_dir, file_path)
+   end
+   if not contains_item(del_list, final_path) then
+      table.insert(del_list, final_path)
+   end
+end
+
+function delete()
+   for i, v in pairs(del_list) do
+      print("deleting: "..v)
+      os.remove(v)
+   end
+end
+
+mp.add_key_binding("ctrl+DEL", "delete_file", mark_delete)
+mp.register_event("shutdown", delete)
+

.config/redshift.conf

@@ -0,0 +1,13 @@
+[redshift]
+temp-day=4500
+temp-night=3400
+
+transition=1
+
+location-provider=manual
+
+adjustment-method=randr
+
+[manual]
+lat=48.10038
+lon=-1.66612

.config/redshift/hooks/brightness.sh

@@ -0,0 +1,61 @@
+#!/bin/sh
+
+# Set brightness via xbrightness when redshift status changes
+
+# Set brightness values for each status.
+# Range from 0 to 100 is valid
+brightness_day="100"
+brightness_transition="60"
+brightness_night="20"
+max=$(cat /sys/class/backlight/intel_backlight/max_brightness)
+actual=$(cat /sys/class/backlight/intel_backlight/actual_brightness)
+
+case $1 in
+	period-changed)
+		case $3 in
+			night)
+				for (( c=$actual; c > $((( $brightness_night * $max / 100))); c-=1 ))
+				do
+					echo $c > /sys/class/backlight/intel_backlight/brightness
+					sleep .2
+				done
+				;;
+			transition)
+				old="$2"
+				if [[ "$old" == "none" ]]
+				then
+					if [[ $actual -lt $(( $brightness_transition * $max / 100 )) ]]
+					then
+						old="night"
+					else
+						old="daytime"
+					fi
+				fi
+				case $old in
+					night)
+						for (( c=$actual; c < $((( $brightness_transition * $max / 100))); c+=1 ))
+						do
+							echo $c > /sys/class/backlight/intel_backlight/brightness
+							sleep .2
+						done
+						;;
+					daytime)
+						for (( c=$actual; c > $((( $brightness_transition * $max / 100))); c-=1 ))
+						do
+							echo $c > /sys/class/backlight/intel_backlight/brightness
+							sleep .2
+						done
+						;;
+				esac
+				;;
+			daytime)
+				for (( c=$actual; c < $((( $brightness_day * $max / 100))); c+=1 ))
+				do
+					echo $c > /sys/class/backlight/intel_backlight/brightness
+					sleep .2
+				done
+				echo $max > /sys/class/backlight/intel_backlight/brightness
+				;;
+		esac
+		;;
+esac

.config/redshift/hooks/notifcation.sh

@@ -0,0 +1,6 @@
+#!/bin/sh
+
+case $1 in
+	period-changed)
+		exec dunstify -u low -r $(sum <<<"redshift" | cut -d' ' -f1) "Redshift" "Period changed to $3"
+esac

.config/systemd/user/mpd-notif.service

@@ -0,0 +1,12 @@
+[Unit]
+PartOf=mpd.service
+After=mpd.service
+Requires=mpd.service
+Description=MPD Notifications
+
+[Service]                                                                          
+ExecStart=/home/breizh/.local/bin/mpd-notif                                    
+Restart=on-failure
+                                                                                   
+[Install]                                                                          
+WantedBy=default.target